Call us at our 24hr number:
epp polypropylene foam moulding machine
Product description Product description Product parameters

epp machine,epp foam machinery,expanded polypropylene foam

Main advantage

1.High quality:

1) Standard components (such as valves, control, hose, etc) in machine use imported brand (Germany/Italy/Japan) to improve equipment quality and add using life.

2) Whole equipment mechanical frame is welded by 16Mn (High manganese steel Q345), frame thickness, machine strength and machine weight is higher than others.

3) Make Zinc spraying layer and spraying plastics layer on the surface of whole equipment frame, which guarantees the best capability and long lifetime for anti-corrosion.

2. How we can save energy consumption for customer

1)Steam system usually equip with full digital proportional control valve (SMC) with black controller and angle seat valve

(GEMU), can automatically adjust the degree of valve open/close by signal, to save energy consumptions, also have a

precise control of production energy consumption. While other Chinese suppliers and KURTZ use equilibrium valve and

analog control.

2) Same as KURTZ machine can equip with condenser and separated vacuum pump for single machine as an auxiliary if customer don’t have Central vacuum system, to accelerate product shaping speed, shorter the cooling time & reduce product water content. Through vacuum cooling, the mold chamber temperature can keep a high temperature when demoulding, to reduce steam consumption and short heating time for next cycle.

3) Two valves of two branches on main steam pipe to save steam consumption: when penetration (fixed steam—move steam—both steam), open two valves together; when moulding, only open small valve as there is no need such a big steam pressure and capacity.

4) Using bigger diameter valve of steam system can offer enough capacity in an instant, to short the cycle time.

5)The mold is aluminum, which have fast heat dissipation. So we add a plate for thermal insulation and reduce steam loss.

6) Mutil-points steam heating, to achieve the steam more evenly distributes in the steam chamber.

About Us
EPS Moulding Machine
EPP Moulding Machine
E-TPU Moulding Machine
Robot Arm
Copyright©JINHUA ALMEGA SMART EQUIPMENT CO., LTD         浙ICP备16023047号-1         Design
Jinhua Almega Smart Equipment Co., Ltd.